{"product_id":"flashforge-creator-5-four-toolhead-multicolour-3d-printer-ff-c5","title":"Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer | FF-C5","description":"\u003cp\u003eThe Creator 5 tackles multicolour printing differently. Instead of pushing every colour through one shared nozzle, it has four independent toolheads, each loaded with its own filament, that dock and swap automatically mid-print. Colour changes need no purging, so there is no pile of wasted filament, and multicolour printing is up to 500% faster.\u003c\/p\u003e\u003cp\u003eAll four toolheads reach the full 256 x 256 x 256mm build volume, and because each has its own nozzle you can mix materials as well as colours, including soluble PVA or BVOH supports for complex shapes. Fully automatic calibration, a built-in camera and dual-band Wi-Fi round off a serious step up for makers.\u003c\/p\u003e\u003ch2\u003eWhat stands out\u003c\/h2\u003e\u003ch3\u003eFour independent toolheads\u003c\/h3\u003e\u003cp\u003eOne toolhead prints while the other three wait in their docks, so every colour or material has its own nozzle. That means less filament waste, less colour contamination and faster switching than feeding every colour through one nozzle.\u003c\/p\u003e\u003ch3\u003eZero purge waste\u003c\/h3\u003e\u003cp\u003eWith no shared nozzle to flush out, switching colours or materials does not waste filament on purging.\u003c\/p\u003e\u003ch3\u003eFast and precise\u003c\/h3\u003e\u003cp\u003e600mm\/s travel, print speeds up to 300mm\/s, 30,000mm\/s² acceleration and a 32mm³\/s maximum flow rate keep large multicolour models moving.\u003c\/p\u003e\u003ch3\u003eCalibrates itself\u003c\/h3\u003e\u003cp\u003eAutomatic levelling, multi-toolhead offset calibration and dynamic flow calibration set everything up for clean surfaces and accurate colour placement, with no manual tuning.\u003c\/p\u003e\u003ch3\u003eHardened nozzles, wide material choice\u003c\/h3\u003e\u003cp\u003eRemovable hardened-steel nozzles reach 320°C and the textured PEI bed reaches 120°C, handling PLA, PETG, TPU, carbon-fibre blends, silk and soluble supports. With an enclosure, ABS, ASA and nylon composites are supported too.\u003c\/p\u003e\u003ch3\u003eKeep an eye on it\u003c\/h3\u003e\u003cp\u003eA built-in 1280 x 720 camera streams at 30fps for remote monitoring, alongside 2.4GHz and 5GHz Wi-Fi, a 4-inch colour touchscreen and multi-printer management.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eToolheads:\u003c\/strong\u003e 4 independent toolheads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulticolour:\u003c\/strong\u003e Up to 4 colours or materials per print, zero purge waste\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 256 x 256 x 256 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed:\u003c\/strong\u003e Up to 600 mm\/s travel, 300 mm\/s print, 30,000 mm\/s² acceleration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHotend:\u003c\/strong\u003e Up to 320°C, hardened-steel removable nozzles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild plate:\u003c\/strong\u003e Textured PEI flexible steel plate, up to 120°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e Fully automatic levelling and toolhead offset calibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera:\u003c\/strong\u003e Built-in, 1280 x 720 at 30 fps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e Wi-Fi (2.4 \/ 5 GHz), USB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 4-inch colour touchscreen\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e Open frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 kg\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":55286399631687,"sku":"FF-C5","price":679.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0550\/5807\/1748\/files\/C5_4.png?v=1791196520","url":"https:\/\/euronics.ie\/products\/flashforge-creator-5-four-toolhead-multicolour-3d-printer-ff-c5","provider":"Euronics Ireland","version":"1.0","type":"link"}