Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer - with four filament spools
Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer - front view
Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer - angled view
Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer - side view
Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer - up to 500% faster multicolour printing
Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer - zero purge waste
Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer - automatic calibration
Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer - dimensions
Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer - width with spools
FlashforgeProduct code FF-C5

Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer

€679.95+ €6.99 delivery
Pre-order

Pre-order. In stock from 1 November.

You pay today and we send it out when it arrives.

In addition to your legal guarantee rights.

2-year extended warranty

For your Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer

2 years of cover
€129one payment, added to your order

If it breaks down after the manufacturer’s guarantee ends, the repair or replacement is covered, from the call-out to the parts.

What’s covered

Call-outAn engineer comes to you
LabourThe repair itself
Replacement partsWhatever the fix needs
TransportGetting it to and from repair

Repair or replacement costs after a mechanical or electrical breakdown, VAT included. No excess to pay on a claim.

How it works

  1. 1
    Tick the boxIt’s added to your basket with your 3d printer.
  2. 2
    We register it for youWe send your details to Brightside and take care of the paperwork.
  3. 3
    Something goes wrong?Call Brightside free on 1800 819 240 and quote your warranty reference.
Irish claims team and a nationwide repair network
Insurance underwritten by AWP P&C S.A., Dutch Branch (Allianz Partners), administered by Brightside, regulated by the Central Bank of Ireland
Full details and FAQs Policy terms (PDF) Product information document (PDF)

In addition to your legal guarantee rights, which stay the same whether you buy cover or not. Changed your mind? Cancel within 14 days for a full refund, as long as no claim has been made.

€1292 years’ cover
Delivered when it arrives Sent out when stock arrives on 1 Nov. Delivery €6.99, so €686.94 in total
Delivery & returnsYour legal guarantee rights WEEE recycling

Questions about the Creator 5? Ask Otto

AI

Otto is an AI assistant and can make mistakes. Check product details, prices and energy labels before you buy.

Ways to pay

View all payment options

humm: credit is subject to approval. You must be 18 or over and resident in Ireland. T&Cs apply. Flexifi Europe Limited, trading as humm, is regulated by the Central Bank of Ireland.

Description

Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer · product code FF-C5

The Flashforge Creator 5 gives each colour its own nozzle. Four independent toolheads dock and swap automatically mid-print, so there is no purging between colour changes, no pile of wasted filament and less colour contamination, and multicolour printing is up to 500% faster. All four toolheads reach the full 256 x 256 x 256mm build volume, leaving plenty of room for detailed multicolour models.

Separate nozzles also mean you can mix materials, including soluble PVA or BVOH supports for complex shapes. The removable hardened-steel nozzles reach 320°C and the textured PEI bed 120°C, while fully automatic levelling, toolhead offset and flow calibration handle the set-up. A built-in 1280 x 720 camera, dual-band Wi-Fi and a 4-inch touchscreen let you keep an eye on long prints from anywhere.

At a glance

  • ToolheadsFour independent toolheads for true multicolour and multi-material prints
  • No wasteZero purge waste when switching colours
  • SpeedUp to 500% faster multicolour printing, 600 mm/s travel
  • Build volume256 x 256 x 256 mm, reachable by all four toolheads
  • CalibrationFully automatic levelling and toolhead offset calibration
  • MonitoringBuilt-in 720p camera with dual-band Wi-Fi
See full specifications
Full description

The Creator 5 tackles multicolour printing differently. Instead of pushing every colour through one shared nozzle, it has four independent toolheads, each loaded with its own filament, that dock and swap automatically mid-print. Colour changes need no purging, so there is no pile of wasted filament, and multicolour printing is up to 500% faster.

All four toolheads reach the full 256 x 256 x 256mm build volume, and because each has its own nozzle you can mix materials as well as colours, including soluble PVA or BVOH supports for complex shapes. Fully automatic calibration, a built-in camera and dual-band Wi-Fi round off a serious step up for makers.

What stands out

Four independent toolheads

One toolhead prints while the other three wait in their docks, so every colour or material has its own nozzle. That means less filament waste, less colour contamination and faster switching than feeding every colour through one nozzle.

Zero purge waste

With no shared nozzle to flush out, switching colours or materials does not waste filament on purging.

Fast and precise

600mm/s travel, print speeds up to 300mm/s, 30,000mm/s² acceleration and a 32mm³/s maximum flow rate keep large multicolour models moving.

Calibrates itself

Automatic levelling, multi-toolhead offset calibration and dynamic flow calibration set everything up for clean surfaces and accurate colour placement, with no manual tuning.

Hardened nozzles, wide material choice

Removable hardened-steel nozzles reach 320°C and the textured PEI bed reaches 120°C, handling PLA, PETG, TPU, carbon-fibre blends, silk and soluble supports. With an enclosure, ABS, ASA and nylon composites are supported too.

Keep an eye on it

A built-in 1280 x 720 camera streams at 30fps for remote monitoring, alongside 2.4GHz and 5GHz Wi-Fi, a 4-inch colour touchscreen and multi-printer management.

Key features

  • Toolheads: 4 independent toolheads
  • Multicolour: Up to 4 colours or materials per print, zero purge waste
  • Build volume: 256 x 256 x 256 mm
  • Speed: Up to 600 mm/s travel, 300 mm/s print, 30,000 mm/s² acceleration
  • Hotend: Up to 320°C, hardened-steel removable nozzles
  • Build plate: Textured PEI flexible steel plate, up to 120°C
  • Calibration: Fully automatic levelling and toolhead offset calibration
  • Camera: Built-in, 1280 x 720 at 30 fps
  • Connectivity: Wi-Fi (2.4 / 5 GHz), USB
  • Display: 4-inch colour touchscreen
  • Frame: Open frame
  • Weight: 14 kg
Compare

How it compares

Compared with 3 similar models, from €379.95 to €829.95.

Same on all 4:Printing technology: FDMMax travel speed: 600 mm/sBed levelling: Automatic See full specifications

Specifications

Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer, product code FF-C5.

Product overview

ModelCreator 5
Product codeFF-C5

Performance

Power-outage recoveryYes
One-touch power on/offYes
Power supply100–120 V / 200–240 V AC, 50/60 Hz, 700 W

Display

Display4-inch 800 x 480 colour touchscreen

Connectivity

ConnectivityWi-Fi (2.4 GHz / 5 GHz), USB

Dimensions and installation

Dimensions436 x 432 x 480 mm without filament tubes and holders; 520 x 443 x 710 mm with
Weight14 kg net, 18 kg gross

Warranty and support

Filaments supported with an enclosureABS, ASA, HIPS, ABS-GF, PA-CF, ASA-CF, ASA-GF, S-Multi, S-PAHT, PET-CF, PAHT-CF, PPA-CF, PPS-CF

More details

Printing technologyFDM
Toolheads4 independent toolheads
Build volume256 x 256 x 256 mm
Max travel speed600 mm/s
Max print speed300 mm/s
Max acceleration30,000 mm/s²
Max flow rate32 mm³/s
Max extruder temperature320°C
NozzlesRemovable hardened steel; 0.4 mm standard, 0.25 / 0.6 / 0.8 mm optional
Max bed temperature120°C
Build plateTextured PEI flexible steel plate
Bed levellingAutomatic
CalibrationMulti-toolhead offset calibration, dynamic flow (pressure advance) calibration
Recommended filamentsPLA, PETG, TPU-90A (top external mount), TPU-95A, TPU-64D, PLA-CF, PETG-CF, Silk, PVA, BVOH
Filament detectionRun-out sensor
Chamber lightingYes
CameraBuilt-in, 1280 x 720 at 30 fps
Slicing softwareOrca-Flashforge, OrcaSlicer
Multi-printer managementYes
FrameOpen frame

Reviews

Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer.

Reviews from verified buyers

Reviews of this model are collected by Feefo from people who bought it.

Euronics on Feefo Independent reviews of our service. Read service reviews

Delivery & returns

Delivery

Pre-order: sent out when stock arrives on 1 Nov. Delivery €6.99. €686.94 including delivery.

Full delivery information

Returns

Changed your mind? Online orders can be cancelled within 14 days of delivery under EU distance-selling rules. Faulty goods are covered by your statutory consumer rights, in addition to any manufacturer warranty.

Refunds & returns policy

Your rights

Know where you stand if something goes wrong.

Your legal guarantee rights Warranty & your rights

Recycling

How to recycle your old electricals under the WEEE scheme.

WEEE recycling
Warranty & support

Warranty and your rights

By law you are entitled to remedies from the seller, free of charge, if goods are not in conformity with the contract. Those rights are not affected by any manufacturer warranty.

Your legal guarantee: the official EU notice

EU notice: Legal guarantee. Minimum two-year legal guarantee protection for goods sold in the European Union. The full text of the notice is available below.

Tap the notice to open it full size, or read the text version below.

europa.eu/youreurope/guarantees Open the notice full size

In Ireland the two-year period is a minimum. The six-year limitation period in which consumers in Ireland can raise a problem with goods is not affected.

Read the notice as text

Legal guarantee

Minimum two-year legal guarantee protection for goods sold in the European Union.

Consumers can claim their rights under the legal guarantee of conformity, for example if goods:

  • do not match the description;
  • do not function as intended.

Sellers are liable for any lack of conformity which existed when the goods were delivered, and which becomes apparent within the legal guarantee period. Sellers in such a situation are required to offer:

  • free repair or free replacement;
  • in some cases, a price reduction or full reimbursement.

Some countries have a longer legal guarantee period. For second-hand goods, a shorter period may apply, but not less than one year.

For more information on your rights in a specific country, scan the QR code below or ask the seller. europa.eu/youreurope/guarantees

What to do if you receive non-conforming goods:

  1. Contact the seller as soon as possible to report the issue;
  2. Provide proof of purchase, such as a receipt, invoice, or bank statement.

Sellers and producers may also offer commercial guarantees, which apply independently from the legal guarantee. For example, you may see this GARAN label representing a commercial guarantee of durability offered by the producer at no additional cost and covering the entire good.

Recycling your old electricals

Recycling your old electricals

Waste Electrical and Electronic Equipment (WEEE) is taken back free of charge on a one-for-one, like-for-like basis. Waste batteries including rechargeable batteries are taken back free of charge. You are not obliged to make any purchase when returning old batteries. Each local authority must also accept household WEEE and small batteries free of charge at its recycling facilities. All WEEE and waste batteries must be recycled and should not be placed in any of your household wheelie bins. Make sure you always recycle all your old electrical goods and batteries.

Take-back is available at Euronics member stores. Find your nearest store or see how take-back works, including collection when we deliver a large appliance.

You might also like

Ready to order, including pre-orders.