Flashforge Creator 5 Pro Enclosed Four-Toolhead 3D Printer

The Creator 5 Pro is the enclosed, engineering-ready version of Flashforge's four-toolhead printer. It has the same independent toolheads that swap automatically with zero purge waste and up to 500% faster multicolour printing, inside a rigid enclosed frame with a chamber that actively heats to 65°C.

That heated chamber is what makes demanding materials practical. Protected from draughts and sudden temperature changes, ABS, ASA, nylon and reinforced composites such as PA-CF and PPA-CF are far less prone to warping, lifting and cracking, while HEPA 13 and activated-carbon filtration cleans the air inside the printer.

What stands out

Heated chamber up to 65°C

Active chamber heating brings the enclosure up to temperature quickly and holds it there with precise control, so engineering materials print with less warping, corner lifting and layer separation.

Engineering materials

Hardened-steel nozzles at up to 320°C and a 120°C textured PEI bed take you from PLA and PETG through to ABS, ASA, PA-CF, PET-CF, PAHT-CF, PPA-CF and PPS-CF, plus soluble PVA and BVOH supports.

Four toolheads, zero purge

Each colour or material has its own toolhead, parked in a dock until it is needed, so colour changes are quick and waste no filament on purging.

Cleaner, more controlled printing

HEPA 13 and activated-carbon filtration with continuous airflow treats the air in the chamber, an auxiliary cooling fan draws in cool air to bring the enclosure temperature down quickly, and the printer detects when the front door or top cover is open.

Calibrates itself

Automatic levelling, multi-toolhead offset calibration and dynamic flow calibration set everything up for clean surfaces and accurate colour placement.

Keep an eye on it

A built-in 1280 x 720 camera streams at 30fps for remote monitoring, with 2.4GHz and 5GHz Wi-Fi, a 4-inch colour touchscreen and multi-printer management.

Key features

• Toolheads: 4 independent toolheads, zero purge waste
• Chamber: Enclosed, actively heated up to 65°C
• Filtration: HEPA 13 plus activated carbon
• Build volume: 256 x 256 x 256 mm
• Speed: Up to 600 mm/s travel, 300 mm/s print, 30,000 mm/s² acceleration
• Hotend: Up to 320°C, hardened-steel removable nozzles
• Build plate: Textured PEI flexible steel plate, up to 120°C
• Materials: PLA and PETG through to ABS, ASA, nylon and carbon-fibre composites
• Camera: Built-in, 1280 x 720 at 30 fps
• Connectivity: Wi-Fi (2.4 / 5 GHz), USB
• Display: 4-inch colour touchscreen
• Weight: 18 kg