Outin Foldable Coffee Stand | OT-FCS-01

A 123 g tripod coffee stand machined from a single block of anodised aluminium, folding to 18.5 mm thin and clipping to a bag by its included carabiner.

The Outin Foldable Coffee Stand is a three-legged brewing platform machined from a single block of aluminium and finished with anodisation. It suits campers, hikers and travelling espresso drinkers who want a stable base for the Outin Mino, Outin Nano or a pour-over dripper without giving up pack space, and it is half the weight of the original stand it evolved from.

The clever part is how it disappears when you are done. The three legs fold the stand down to 128.2 x 126 x 18.5 mm, slim enough for a pouch or pocket, and the detachable carabiner clips it to a rucksack, belt or gear loop. At 123 g, you will barely notice it is there until it is time to brew.

Ideal for

Campsite espresso

The tripod legs settle onto uneven benches and camp tables, holding the Mino or Nano level while a shot pulls. Folded, it clips to the outside of a pack and stays out of the way.

Trailside pour-over

The 68 mm inner ring accepts standard drippers and conical funnels, turning a flat surface into a brew bar. Outin does advise checking your own dripper's fit before you set off.

Minimal kits

For one-bag travellers every gram counts. At 123 g and 18.5 mm folded, the stand adds real stability to a coffee kit without claiming meaningful space or weight in the luggage.

Key features

123 g unibody build

Machined from a single block of aluminium, the one-piece unibody construction balances strength, lightness and elegance, with no joints or fixings across the main body.

Folds to 18.5 mm

The three legs collapse the stand to 128.2 x 126 x 18.5 mm, slim enough to slide into a pouch, a side pocket or the flat of a suitcase.

Clip-on carabiner

A detachable carabiner comes in the box, so the folded stand hangs from bags, belts or outdoor gear instead of taking up space inside your pack.

Tripod stability

Triangular support spreads the load across three legs, giving excellent balance and stability on surfaces from kitchen worktops to campground tables.

68 mm inner ring

The ring is designed to hold the Outin Mino, Outin Nano, standard drippers and conical pour-over funnels; Outin recommends checking fit before use.

124 mm standing height

Set up, the platform sits 124 mm above the surface, leaving room for a cup to wait beneath your espresso machine or dripper as it brews.

More to know

Machined from a single block

Most folding gear is an assembly of parts, and every joint is a place to work loose. Outin took the opposite route here. The stand's body is machined from a single block of aluminium, then anodised for durability, so the structure is one continuous piece where it matters. The result is a stand that weighs just 123 g yet feels like one solid piece, because for the most part it is.

Folds flat, clips on, disappears

A stand only earns a place in a pack if it costs almost nothing to carry. Folded, this one measures 128.2 x 126 x 18.5 mm, roughly the footprint of a saucer and thinner than most wallets. The detachable carabiner then takes it off your hands entirely, clipping the folded stand to a rucksack strap, belt or gear loop so the space inside your bag stays free for beans and brewer.

Steady ground for every brewer

Three legs beat four on rough ground, because a tripod cannot rock. That geometry is what lets the stand sit level on kitchen worktops, picnic benches and campground tables alike, holding your brewer steady at 124 mm with a cup waiting underneath. The 68 mm inner ring is shaped for the Outin Mino and Nano, and it also takes standard drippers and conical pour-over funnels, so one stand covers espresso and filter duty on the same trip. Outin sensibly advises checking that your own dripper or funnel fits before you rely on it, and the box keeps things simple: the stand and its carabiner, ready to clip on and go.

Specifications

What's in the box

• Foldable coffee stand x1
• Carabiner x1